Part list

Here is a description of all parts that you need to build Pi One from scratch.

Parts to buy

Here is a list of parts that you need buy.

  • Screw M3x10 - 1x
  • Screw M3x6 - 7x
  • Nut M3 - 8x
  • Setscrew M3x8 - 1x
  • Setscrew M3x5 - 1x
  • Spring 4x10 - 1x (you get it from ballpoint)
  • Capacitor (1800 uF, 6.3 V) - 1x (can be for higher voltage, but 6.3 V is small enough)
  • Battery clip (2XAAA) - 1x
  • Microswitch (ON-ON) - 1x
  • LASER module (5mW) - 1x
  • Spokes - 1x (from bicykle)

 

Body parts

  1. Left body (file: gun_body.stl, mirrored)
  2. Right body (file: gun_body.stl)
  3. Magazine bottom (file: magazine_bottom.stl or magazine_bottom_with_support.stl)
  4. Screw M3x10
  5. Nut M3
  6. Pin 2x12 (3x)

Not listed: Battery clip

Grip parts

  1. Grip left (file: grip.stl, mirrored)
  2. Grip right (file: grip.stl)
  3. Nut clip (file: nut_clip.stl, 2x)
  4. Screw M3x6 (2x)
  5. Nut M3 (2x)
  6. Pin 2x8 (2x)

LASER Adjust parts

  1. Swing (file: swing.stl)
  2. Ship (file: ship.stl)
  3. Consola (file: consola.stl)
  4. LASER module
  5. Setscrew M3x8
  6. Setscrew M3x5
  7. Spring 4x10
  8. Pin 2x10
  9. Screw M3x6 (2x)
  10. Nut M3 (2x)

Not listed: Any blue and red wires.

Slide parts

  1. Slide side right (file: slide_side_mirror.stl)
  2. Slide side right (file: slide_side.stl)
  3. Slide top front (file: slide_top.stl)
  4. Slide top rear (file: slide_top.stl)
  5. Sight rear base (file: sight_rear_base.stl)
  6. Nut clip (file: nut_clip.stl, 3x)
  7. Slide front (file: slide_front.stl)
  8. Fake barel (file: fake_barel.stl)
  9. Sight front (file: sight_front.stl)
  10. Sight rear (file: sight_rear.stl)
  11. Slide holder back (file: slide_holder_back.stl)
  12. Slide holder front (file: slide_holder_front.stl)
  13. Screw M3x6 (3x)
  14. Nut M3 (3x)

Trigger mechanism parts

  1. Trigger body left (file: trigger_mechanism_body.stl (mirrored)
  2. Trigger body right (file: trigger_mechanism_body.stl)
  3. Trigger lewer (file: trigger_mechanism_lewer.stl)
  4. Trigger (file: trigger_mechanism_trigger.stl)
  5. Microswitch (ON-ON)
  6. Pin 2x14 (6x)

Not listed: Capacitor (1800 uF, 6.3 V)